added kick

basics/envelope-generator/envelope-generator.ino

@@ -7,7 +7,7 @@
  */
 
 int pwmPin = 11; //define output pin, Meergranen output pin is 11
-bool triggered; // logic: trigered, yes or no
+bool triggered; // logic: triggered, yes or no
 
 void setup() {
   pinMode(pwmPin, OUTPUT); //set pin as output
@@ -18,7 +18,7 @@ void loop() { // run forever
   int input3 = digitalRead(A3); // read analog pin 3, detect triggers
 
   if(input3 && !triggered) {
-
+  Serial.println("trigger!");
 //ATTACK
      for(int value = 0; value<=255; value++){ // cycle through 255 values, start at 0. 8 bit output == 255 values
          analogWrite(pwmPin, value); // analogWrite simulates smooth sinewave using complex pwm duty cycles

modules/gabber-kick/gabber-kick.ino

@@ -0,0 +1,63 @@
+/*
+ * 
+ * GABBER KICK  (requires trigger input)
+ * 
+ * // A2 sets pitch and delay of ATTACK (timbre)
+ * // A1 sets pitch and delay of SUSTAIN (actual phatness)
+ * 
+ */
+#define SPEAKER_PIN 11 
+bool triggered; // logic: trigered, yes or no
+
+
+void setup() {
+  // set pin 11 as output
+  pinMode(SPEAKER_PIN, OUTPUT);
+    Serial.begin(9600); // debugging (see if trigger is registered)
+
+}
+
+void loop() {
+
+   int input3 = digitalRead(A3); // read analog pin 3
+
+    if(input3 && !triggered) {
+//       analogWrite(11,0); //nasty attack try (speaker clip/click)
+//      delay(analogRead(A2));
+//       analogWrite(11,255);
+//      delay(analogRead(A2));
+//       analogWrite(11,0);
+
+//ATTACK
+     for(int i=0;i<10;i++){ // i = DELAY+SUSTAIN+RELEASE of ATTACK
+       analogWrite(11,0);
+      delayMicroseconds(analogRead(A2)*i); // lower the pitch over time
+       analogWrite(11,255);
+      delayMicroseconds(analogRead(A2)*i); // lower the pitch over time
+       analogWrite(11,0);
+       
+     // delay(1);
+      }
+   
+    //delay(1);
+
+//SUSTAIN RELEASE
+     for(int i=0;i<55;i++){ // i = DELAY+SUSTAIN+RELEASE
+       analogWrite(11,0);
+      delayMicroseconds(analogRead(A1)*i); // lower the pitch over time
+       analogWrite(11,255);
+      delayMicroseconds(analogRead(A1)*i); // lower the pitch over time
+       analogWrite(11,0);
+      delay(1);
+      }
+   
+        triggered = true;
+    }
+    else if(!input3 && triggered) { //if there is no reading on input3 and condition triggered is true (aka sound is playing), set triggered to false, aka stop playing 
+      // STOP WHEN NO TRIGGER IS PRESENT (or do something else ;)
+      triggered = false;
+       noTone(SPEAKER_PIN);
+    }
+
+    
+}