serial

sketches/anna /humanReadable_buttons_/humanReadable_buttons_.ino

@@ -0,0 +1,57 @@
+
+  
+  #include <fontALL.h> //libraries fro the TV OUT mode
+  #include <TVout.h>
+
+  //button1=english,button2=HEX,button3=BIN:the buttons control the serial communcation with the other module
+  const char neighbour [] = "neighbour[ˈneɪbər] says:";
+  const int button1Pin = 4; //buttons constants 
+  const int button2Pin = 3;
+  const int button3Pin = 2;
+  
+  int button1State = 0; //buttons variables
+  int button2State = 0;
+  int button3State = 0;
+  
+  int incomingByte = 0; //for serial communication 
+
+  TVout TV; //for the TVOUT mode
+
+void setup() {
+  // put your setup code here, to run once:
+  Serial.begin (9600);
+  Serial.println(TV.vres());
+  Serial.println(TV.hres());
+  TV.begin(PAL,120,96);
+
+  pinMode ( button1Pin && button2Pin && button3Pin, INPUT_PULLUP);  
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+  button1State = digitalRead(button1Pin); //read the buttons state
+  button2State = digitalRead(button2Pin);
+  button3State = digitalRead(button3Pin);
+
+  if (button1State == LOW && Serial.available() > 0) { //serial communcation english
+  incomingByte = Serial.read();//read the incoming byte
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte);
+  }
+
+  else if (button2State == LOW && Serial.available() > 0) { //serial communication HEX
+  incomingByte = Serial.read();
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte, HEX);
+  }
+  
+  else if (button3State == LOW && Serial.available() > 0) { //serial communcation BIN 
+  incomingByte = Serial.read();
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte, BIN);
+  }
+
+}

sketches/anna /humanReadable_knobs/humanReadable_knobs.ino

@@ -0,0 +1,58 @@
+
+  
+  #include <fontALL.h> //libraries fro the TV OUT mode
+  #include <TVout.h>
+
+  //button1=english,button2=HEX,button3=BIN:the buttons control the serial communcation with the other module
+  const char neighbour [] = "neighbour[ˈneɪbər] says:";
+
+  int knob1;
+  int knob2;
+  
+  int incomingByte = 0; //for serial communication 
+
+  TVout TV; //for the TVOUT mode
+
+void setup() {
+  // put your setup code here, to run once:
+  Serial.begin (9600);
+  Serial.println(TV.vres());
+  Serial.println(TV.hres());
+  TV.begin(PAL,120,96);
+ 
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+   knob1 = analogRead(1);
+   knob2 = analogRead(2);
+
+  if (knob1>0 && knob1<500 && Serial.available() > 0) { //serial communcation english
+  incomingByte = Serial.read();//read the incoming byte
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte);
+  }
+
+  else if (knob1>500 && knob1<1023 && Serial.available() > 0) { //serial communication HEX
+  incomingByte = Serial.read();
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte, HEX);
+  }
+  
+  else if (knob2>0 && knob2<500 && Serial.available() > 0) { //serial communcation english
+  incomingByte = Serial.read();
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte);
+  }
+
+  else if (knob2>500 && knob2<1023 && Serial.available() > 0) { //serial communication BIN
+  incomingByte = Serial.read();
+  TV.print (0, 0, neighbour);
+  delay (500);
+  TV.println (incomingByte, BIN);
+  }
+
+}