diff --git a/requirements.txt b/requirements.txt index 1eb4cb70..d2fe9152 100644 --- a/requirements.txt +++ b/requirements.txt @@ -19,7 +19,7 @@ singledispatch six sqlalchemy tornado -https://pypi.python.org/packages/02/f8/97105237d0ba693b6f0bdcd94da0504e9a4433988c4393d8d3049094be7a/validate-1.0.1.tar.gz +#https://pypi.python.org/packages/02/f8/97105237d0ba693b6f0bdcd94da0504e9a4433988c4393d8d3049094be7a/validate-1.0.1.tar.gz #validate wand werkzeug diff --git a/vendor/validate.py b/vendor/validate.py new file mode 100644 index 00000000..b7a964c4 --- /dev/null +++ b/vendor/validate.py @@ -0,0 +1,1472 @@ +# validate.py +# A Validator object +# Copyright (C) 2005-2014: +# (name) : (email) +# Michael Foord: fuzzyman AT voidspace DOT org DOT uk +# Mark Andrews: mark AT la-la DOT com +# Nicola Larosa: nico AT tekNico DOT net +# Rob Dennis: rdennis AT gmail DOT com +# Eli Courtwright: eli AT courtwright DOT org + +# This software is licensed under the terms of the BSD license. +# http://opensource.org/licenses/BSD-3-Clause + +# ConfigObj 5 - main repository for documentation and issue tracking: +# https://github.com/DiffSK/configobj + +""" + The Validator object is used to check that supplied values + conform to a specification. + + The value can be supplied as a string - e.g. from a config file. + In this case the check will also *convert* the value to + the required type. This allows you to add validation + as a transparent layer to access data stored as strings. + The validation checks that the data is correct *and* + converts it to the expected type. + + Some standard checks are provided for basic data types. + Additional checks are easy to write. They can be + provided when the ``Validator`` is instantiated or + added afterwards. + + The standard functions work with the following basic data types : + + * integers + * floats + * booleans + * strings + * ip_addr + + plus lists of these datatypes + + Adding additional checks is done through coding simple functions. + + The full set of standard checks are : + + * 'integer': matches integer values (including negative) + Takes optional 'min' and 'max' arguments : :: + + integer() + integer(3, 9) # any value from 3 to 9 + integer(min=0) # any positive value + integer(max=9) + + * 'float': matches float values + Has the same parameters as the integer check. + + * 'boolean': matches boolean values - ``True`` or ``False`` + Acceptable string values for True are : + true, on, yes, 1 + Acceptable string values for False are : + false, off, no, 0 + + Any other value raises an error. + + * 'ip_addr': matches an Internet Protocol address, v.4, represented + by a dotted-quad string, i.e. '1.2.3.4'. + + * 'string': matches any string. + Takes optional keyword args 'min' and 'max' + to specify min and max lengths of the string. + + * 'list': matches any list. + Takes optional keyword args 'min', and 'max' to specify min and + max sizes of the list. (Always returns a list.) + + * 'tuple': matches any tuple. + Takes optional keyword args 'min', and 'max' to specify min and + max sizes of the tuple. (Always returns a tuple.) + + * 'int_list': Matches a list of integers. + Takes the same arguments as list. + + * 'float_list': Matches a list of floats. + Takes the same arguments as list. + + * 'bool_list': Matches a list of boolean values. + Takes the same arguments as list. + + * 'ip_addr_list': Matches a list of IP addresses. + Takes the same arguments as list. + + * 'string_list': Matches a list of strings. + Takes the same arguments as list. + + * 'mixed_list': Matches a list with different types in + specific positions. List size must match + the number of arguments. + + Each position can be one of : + 'integer', 'float', 'ip_addr', 'string', 'boolean' + + So to specify a list with two strings followed + by two integers, you write the check as : :: + + mixed_list('string', 'string', 'integer', 'integer') + + * 'pass': This check matches everything ! It never fails + and the value is unchanged. + + It is also the default if no check is specified. + + * 'option': This check matches any from a list of options. + You specify this check with : :: + + option('option 1', 'option 2', 'option 3') + + You can supply a default value (returned if no value is supplied) + using the default keyword argument. + + You specify a list argument for default using a list constructor syntax in + the check : :: + + checkname(arg1, arg2, default=list('val 1', 'val 2', 'val 3')) + + A badly formatted set of arguments will raise a ``VdtParamError``. +""" + +__version__ = '1.0.1' + + +__all__ = ( + '__version__', + 'dottedQuadToNum', + 'numToDottedQuad', + 'ValidateError', + 'VdtUnknownCheckError', + 'VdtParamError', + 'VdtTypeError', + 'VdtValueError', + 'VdtValueTooSmallError', + 'VdtValueTooBigError', + 'VdtValueTooShortError', + 'VdtValueTooLongError', + 'VdtMissingValue', + 'Validator', + 'is_integer', + 'is_float', + 'is_boolean', + 'is_list', + 'is_tuple', + 'is_ip_addr', + 'is_string', + 'is_int_list', + 'is_bool_list', + 'is_float_list', + 'is_string_list', + 'is_ip_addr_list', + 'is_mixed_list', + 'is_option', + '__docformat__', +) + + +import re +import sys +from pprint import pprint + +#TODO - #21 - six is part of the repo now, but we didn't switch over to it here +# this could be replaced if six is used for compatibility, or there are no +# more assertions about items being a string +if sys.version_info < (3,): + string_type = basestring +else: + string_type = str + # so tests that care about unicode on 2.x can specify unicode, and the same + # tests when run on 3.x won't complain about a undefined name "unicode" + # since all strings are unicode on 3.x we just want to pass it through + # unchanged + unicode = lambda x: x + # in python 3, all ints are equivalent to python 2 longs, and they'll + # never show "L" in the repr + long = int + +_list_arg = re.compile(r''' + (?: + ([a-zA-Z_][a-zA-Z0-9_]*)\s*=\s*list\( + ( + (?: + \s* + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s\)][^,\)]*?) # unquoted + ) + \s*,\s* + )* + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s\)][^,\)]*?) # unquoted + )? # last one + ) + \) + ) +''', re.VERBOSE | re.DOTALL) # two groups + +_list_members = re.compile(r''' + ( + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s=][^,=]*?) # unquoted + ) + (?: + (?:\s*,\s*)|(?:\s*$) # comma + ) +''', re.VERBOSE | re.DOTALL) # one group + +_paramstring = r''' + (?: + ( + (?: + [a-zA-Z_][a-zA-Z0-9_]*\s*=\s*list\( + (?: + \s* + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s\)][^,\)]*?) # unquoted + ) + \s*,\s* + )* + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s\)][^,\)]*?) # unquoted + )? # last one + \) + )| + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s=][^,=]*?)| # unquoted + (?: # keyword argument + [a-zA-Z_][a-zA-Z0-9_]*\s*=\s* + (?: + (?:".*?")| # double quotes + (?:'.*?')| # single quotes + (?:[^'",\s=][^,=]*?) # unquoted + ) + ) + ) + ) + (?: + (?:\s*,\s*)|(?:\s*$) # comma + ) + ) + ''' + +_matchstring = '^%s*' % _paramstring + +# Python pre 2.2.1 doesn't have bool +try: + bool +except NameError: + def bool(val): + """Simple boolean equivalent function. """ + if val: + return 1 + else: + return 0 + + +def dottedQuadToNum(ip): + """ + Convert decimal dotted quad string to long integer + + >>> int(dottedQuadToNum('1 ')) + 1 + >>> int(dottedQuadToNum(' 1.2')) + 16777218 + >>> int(dottedQuadToNum(' 1.2.3 ')) + 16908291 + >>> int(dottedQuadToNum('1.2.3.4')) + 16909060 + >>> dottedQuadToNum('255.255.255.255') + 4294967295 + >>> dottedQuadToNum('255.255.255.256') + Traceback (most recent call last): + ValueError: Not a good dotted-quad IP: 255.255.255.256 + """ + + # import here to avoid it when ip_addr values are not used + import socket, struct + + try: + return struct.unpack('!L', + socket.inet_aton(ip.strip()))[0] + except socket.error: + raise ValueError('Not a good dotted-quad IP: %s' % ip) + return + + +def numToDottedQuad(num): + """ + Convert int or long int to dotted quad string + + >>> numToDottedQuad(long(-1)) + Traceback (most recent call last): + ValueError: Not a good numeric IP: -1 + >>> numToDottedQuad(long(1)) + '0.0.0.1' + >>> numToDottedQuad(long(16777218)) + '1.0.0.2' + >>> numToDottedQuad(long(16908291)) + '1.2.0.3' + >>> numToDottedQuad(long(16909060)) + '1.2.3.4' + >>> numToDottedQuad(long(4294967295)) + '255.255.255.255' + >>> numToDottedQuad(long(4294967296)) + Traceback (most recent call last): + ValueError: Not a good numeric IP: 4294967296 + >>> numToDottedQuad(-1) + Traceback (most recent call last): + ValueError: Not a good numeric IP: -1 + >>> numToDottedQuad(1) + '0.0.0.1' + >>> numToDottedQuad(16777218) + '1.0.0.2' + >>> numToDottedQuad(16908291) + '1.2.0.3' + >>> numToDottedQuad(16909060) + '1.2.3.4' + >>> numToDottedQuad(4294967295) + '255.255.255.255' + >>> numToDottedQuad(4294967296) + Traceback (most recent call last): + ValueError: Not a good numeric IP: 4294967296 + + """ + + # import here to avoid it when ip_addr values are not used + import socket, struct + + # no need to intercept here, 4294967295L is fine + if num > long(4294967295) or num < 0: + raise ValueError('Not a good numeric IP: %s' % num) + try: + return socket.inet_ntoa( + struct.pack('!L', long(num))) + except (socket.error, struct.error, OverflowError): + raise ValueError('Not a good numeric IP: %s' % num) + + +class ValidateError(Exception): + """ + This error indicates that the check failed. + It can be the base class for more specific errors. + + Any check function that fails ought to raise this error. + (or a subclass) + + >>> raise ValidateError + Traceback (most recent call last): + ValidateError + """ + + +class VdtMissingValue(ValidateError): + """No value was supplied to a check that needed one.""" + + +class VdtUnknownCheckError(ValidateError): + """An unknown check function was requested""" + + def __init__(self, value): + """ + >>> raise VdtUnknownCheckError('yoda') + Traceback (most recent call last): + VdtUnknownCheckError: the check "yoda" is unknown. + """ + ValidateError.__init__(self, 'the check "%s" is unknown.' % (value,)) + + +class VdtParamError(SyntaxError): + """An incorrect parameter was passed""" + + def __init__(self, name, value): + """ + >>> raise VdtParamError('yoda', 'jedi') + Traceback (most recent call last): + VdtParamError: passed an incorrect value "jedi" for parameter "yoda". + """ + SyntaxError.__init__(self, 'passed an incorrect value "%s" for parameter "%s".' % (value, name)) + + +class VdtTypeError(ValidateError): + """The value supplied was of the wrong type""" + + def __init__(self, value): + """ + >>> raise VdtTypeError('jedi') + Traceback (most recent call last): + VdtTypeError: the value "jedi" is of the wrong type. + """ + ValidateError.__init__(self, 'the value "%s" is of the wrong type.' % (value,)) + + +class VdtValueError(ValidateError): + """The value supplied was of the correct type, but was not an allowed value.""" + + def __init__(self, value): + """ + >>> raise VdtValueError('jedi') + Traceback (most recent call last): + VdtValueError: the value "jedi" is unacceptable. + """ + ValidateError.__init__(self, 'the value "%s" is unacceptable.' % (value,)) + + +class VdtValueTooSmallError(VdtValueError): + """The value supplied was of the correct type, but was too small.""" + + def __init__(self, value): + """ + >>> raise VdtValueTooSmallError('0') + Traceback (most recent call last): + VdtValueTooSmallError: the value "0" is too small. + """ + ValidateError.__init__(self, 'the value "%s" is too small.' % (value,)) + + +class VdtValueTooBigError(VdtValueError): + """The value supplied was of the correct type, but was too big.""" + + def __init__(self, value): + """ + >>> raise VdtValueTooBigError('1') + Traceback (most recent call last): + VdtValueTooBigError: the value "1" is too big. + """ + ValidateError.__init__(self, 'the value "%s" is too big.' % (value,)) + + +class VdtValueTooShortError(VdtValueError): + """The value supplied was of the correct type, but was too short.""" + + def __init__(self, value): + """ + >>> raise VdtValueTooShortError('jed') + Traceback (most recent call last): + VdtValueTooShortError: the value "jed" is too short. + """ + ValidateError.__init__( + self, + 'the value "%s" is too short.' % (value,)) + + +class VdtValueTooLongError(VdtValueError): + """The value supplied was of the correct type, but was too long.""" + + def __init__(self, value): + """ + >>> raise VdtValueTooLongError('jedie') + Traceback (most recent call last): + VdtValueTooLongError: the value "jedie" is too long. + """ + ValidateError.__init__(self, 'the value "%s" is too long.' % (value,)) + + +class Validator(object): + """ + Validator is an object that allows you to register a set of 'checks'. + These checks take input and test that it conforms to the check. + + This can also involve converting the value from a string into + the correct datatype. + + The ``check`` method takes an input string which configures which + check is to be used and applies that check to a supplied value. + + An example input string would be: + 'int_range(param1, param2)' + + You would then provide something like: + + >>> def int_range_check(value, min, max): + ... # turn min and max from strings to integers + ... min = int(min) + ... max = int(max) + ... # check that value is of the correct type. + ... # possible valid inputs are integers or strings + ... # that represent integers + ... if not isinstance(value, (int, long, string_type)): + ... raise VdtTypeError(value) + ... elif isinstance(value, string_type): + ... # if we are given a string + ... # attempt to convert to an integer + ... try: + ... value = int(value) + ... except ValueError: + ... raise VdtValueError(value) + ... # check the value is between our constraints + ... if not min <= value: + ... raise VdtValueTooSmallError(value) + ... if not value <= max: + ... raise VdtValueTooBigError(value) + ... return value + + >>> fdict = {'int_range': int_range_check} + >>> vtr1 = Validator(fdict) + >>> vtr1.check('int_range(20, 40)', '30') + 30 + >>> vtr1.check('int_range(20, 40)', '60') + Traceback (most recent call last): + VdtValueTooBigError: the value "60" is too big. + + New functions can be added with : :: + + >>> vtr2 = Validator() + >>> vtr2.functions['int_range'] = int_range_check + + Or by passing in a dictionary of functions when Validator + is instantiated. + + Your functions *can* use keyword arguments, + but the first argument should always be 'value'. + + If the function doesn't take additional arguments, + the parentheses are optional in the check. + It can be written with either of : :: + + keyword = function_name + keyword = function_name() + + The first program to utilise Validator() was Michael Foord's + ConfigObj, an alternative to ConfigParser which supports lists and + can validate a config file using a config schema. + For more details on using Validator with ConfigObj see: + https://configobj.readthedocs.org/en/latest/configobj.html + """ + + # this regex does the initial parsing of the checks + _func_re = re.compile(r'(.+?)\((.*)\)', re.DOTALL) + + # this regex takes apart keyword arguments + _key_arg = re.compile(r'^([a-zA-Z_][a-zA-Z0-9_]*)\s*=\s*(.*)$', re.DOTALL) + + + # this regex finds keyword=list(....) type values + _list_arg = _list_arg + + # this regex takes individual values out of lists - in one pass + _list_members = _list_members + + # These regexes check a set of arguments for validity + # and then pull the members out + _paramfinder = re.compile(_paramstring, re.VERBOSE | re.DOTALL) + _matchfinder = re.compile(_matchstring, re.VERBOSE | re.DOTALL) + + + def __init__(self, functions=None): + """ + >>> vtri = Validator() + """ + self.functions = { + '': self._pass, + 'integer': is_integer, + 'float': is_float, + 'boolean': is_boolean, + 'ip_addr': is_ip_addr, + 'string': is_string, + 'list': is_list, + 'tuple': is_tuple, + 'int_list': is_int_list, + 'float_list': is_float_list, + 'bool_list': is_bool_list, + 'ip_addr_list': is_ip_addr_list, + 'string_list': is_string_list, + 'mixed_list': is_mixed_list, + 'pass': self._pass, + 'option': is_option, + 'force_list': force_list, + } + if functions is not None: + self.functions.update(functions) + # tekNico: for use by ConfigObj + self.baseErrorClass = ValidateError + self._cache = {} + + + def check(self, check, value, missing=False): + """ + Usage: check(check, value) + + Arguments: + check: string representing check to apply (including arguments) + value: object to be checked + Returns value, converted to correct type if necessary + + If the check fails, raises a ``ValidateError`` subclass. + + >>> vtor.check('yoda', '') + Traceback (most recent call last): + VdtUnknownCheckError: the check "yoda" is unknown. + >>> vtor.check('yoda()', '') + Traceback (most recent call last): + VdtUnknownCheckError: the check "yoda" is unknown. + + >>> vtor.check('string(default="")', '', missing=True) + '' + """ + fun_name, fun_args, fun_kwargs, default = self._parse_with_caching(check) + + if missing: + if default is None: + # no information needed here - to be handled by caller + raise VdtMissingValue() + value = self._handle_none(default) + + if value is None: + return None + + return self._check_value(value, fun_name, fun_args, fun_kwargs) + + + def _handle_none(self, value): + if value == 'None': + return None + elif value in ("'None'", '"None"'): + # Special case a quoted None + value = self._unquote(value) + return value + + + def _parse_with_caching(self, check): + if check in self._cache: + fun_name, fun_args, fun_kwargs, default = self._cache[check] + # We call list and dict below to work with *copies* of the data + # rather than the original (which are mutable of course) + fun_args = list(fun_args) + fun_kwargs = dict(fun_kwargs) + else: + fun_name, fun_args, fun_kwargs, default = self._parse_check(check) + fun_kwargs = dict([(str(key), value) for (key, value) in list(fun_kwargs.items())]) + self._cache[check] = fun_name, list(fun_args), dict(fun_kwargs), default + return fun_name, fun_args, fun_kwargs, default + + + def _check_value(self, value, fun_name, fun_args, fun_kwargs): + try: + fun = self.functions[fun_name] + except KeyError: + raise VdtUnknownCheckError(fun_name) + else: + return fun(value, *fun_args, **fun_kwargs) + + + def _parse_check(self, check): + fun_match = self._func_re.match(check) + if fun_match: + fun_name = fun_match.group(1) + arg_string = fun_match.group(2) + arg_match = self._matchfinder.match(arg_string) + if arg_match is None: + # Bad syntax + raise VdtParamError('Bad syntax in check "%s".' % check) + fun_args = [] + fun_kwargs = {} + # pull out args of group 2 + for arg in self._paramfinder.findall(arg_string): + # args may need whitespace removing (before removing quotes) + arg = arg.strip() + listmatch = self._list_arg.match(arg) + if listmatch: + key, val = self._list_handle(listmatch) + fun_kwargs[key] = val + continue + keymatch = self._key_arg.match(arg) + if keymatch: + val = keymatch.group(2) + if not val in ("'None'", '"None"'): + # Special case a quoted None + val = self._unquote(val) + fun_kwargs[keymatch.group(1)] = val + continue + + fun_args.append(self._unquote(arg)) + else: + # allows for function names without (args) + return check, (), {}, None + + # Default must be deleted if the value is specified too, + # otherwise the check function will get a spurious "default" keyword arg + default = fun_kwargs.pop('default', None) + return fun_name, fun_args, fun_kwargs, default + + + def _unquote(self, val): + """Unquote a value if necessary.""" + if (len(val) >= 2) and (val[0] in ("'", '"')) and (val[0] == val[-1]): + val = val[1:-1] + return val + + + def _list_handle(self, listmatch): + """Take apart a ``keyword=list('val, 'val')`` type string.""" + out = [] + name = listmatch.group(1) + args = listmatch.group(2) + for arg in self._list_members.findall(args): + out.append(self._unquote(arg)) + return name, out + + + def _pass(self, value): + """ + Dummy check that always passes + + >>> vtor.check('', 0) + 0 + >>> vtor.check('', '0') + '0' + """ + return value + + + def get_default_value(self, check): + """ + Given a check, return the default value for the check + (converted to the right type). + + If the check doesn't specify a default value then a + ``KeyError`` will be raised. + """ + fun_name, fun_args, fun_kwargs, default = self._parse_with_caching(check) + if default is None: + raise KeyError('Check "%s" has no default value.' % check) + value = self._handle_none(default) + if value is None: + return value + return self._check_value(value, fun_name, fun_args, fun_kwargs) + + +def _is_num_param(names, values, to_float=False): + """ + Return numbers from inputs or raise VdtParamError. + + Lets ``None`` pass through. + Pass in keyword argument ``to_float=True`` to + use float for the conversion rather than int. + + >>> _is_num_param(('', ''), (0, 1.0)) + [0, 1] + >>> _is_num_param(('', ''), (0, 1.0), to_float=True) + [0.0, 1.0] + >>> _is_num_param(('a'), ('a')) + Traceback (most recent call last): + VdtParamError: passed an incorrect value "a" for parameter "a". + """ + fun = to_float and float or int + out_params = [] + for (name, val) in zip(names, values): + if val is None: + out_params.append(val) + elif isinstance(val, (int, long, float, string_type)): + try: + out_params.append(fun(val)) + except ValueError as e: + raise VdtParamError(name, val) + else: + raise VdtParamError(name, val) + return out_params + + +# built in checks +# you can override these by setting the appropriate name +# in Validator.functions +# note: if the params are specified wrongly in your input string, +# you will also raise errors. + +def is_integer(value, min=None, max=None): + """ + A check that tests that a given value is an integer (int, or long) + and optionally, between bounds. A negative value is accepted, while + a float will fail. + + If the value is a string, then the conversion is done - if possible. + Otherwise a VdtError is raised. + + >>> vtor.check('integer', '-1') + -1 + >>> vtor.check('integer', '0') + 0 + >>> vtor.check('integer', 9) + 9 + >>> vtor.check('integer', 'a') + Traceback (most recent call last): + VdtTypeError: the value "a" is of the wrong type. + >>> vtor.check('integer', '2.2') + Traceback (most recent call last): + VdtTypeError: the value "2.2" is of the wrong type. + >>> vtor.check('integer(10)', '20') + 20 + >>> vtor.check('integer(max=20)', '15') + 15 + >>> vtor.check('integer(10)', '9') + Traceback (most recent call last): + VdtValueTooSmallError: the value "9" is too small. + >>> vtor.check('integer(10)', 9) + Traceback (most recent call last): + VdtValueTooSmallError: the value "9" is too small. + >>> vtor.check('integer(max=20)', '35') + Traceback (most recent call last): + VdtValueTooBigError: the value "35" is too big. + >>> vtor.check('integer(max=20)', 35) + Traceback (most recent call last): + VdtValueTooBigError: the value "35" is too big. + >>> vtor.check('integer(0, 9)', False) + 0 + """ + (min_val, max_val) = _is_num_param(('min', 'max'), (min, max)) + if not isinstance(value, (int, long, string_type)): + raise VdtTypeError(value) + if isinstance(value, string_type): + # if it's a string - does it represent an integer ? + try: + value = int(value) + except ValueError: + raise VdtTypeError(value) + if (min_val is not None) and (value < min_val): + raise VdtValueTooSmallError(value) + if (max_val is not None) and (value > max_val): + raise VdtValueTooBigError(value) + return value + + +def is_float(value, min=None, max=None): + """ + A check that tests that a given value is a float + (an integer will be accepted), and optionally - that it is between bounds. + + If the value is a string, then the conversion is done - if possible. + Otherwise a VdtError is raised. + + This can accept negative values. + + >>> vtor.check('float', '2') + 2.0 + + From now on we multiply the value to avoid comparing decimals + + >>> vtor.check('float', '-6.8') * 10 + -68.0 + >>> vtor.check('float', '12.2') * 10 + 122.0 + >>> vtor.check('float', 8.4) * 10 + 84.0 + >>> vtor.check('float', 'a') + Traceback (most recent call last): + VdtTypeError: the value "a" is of the wrong type. + >>> vtor.check('float(10.1)', '10.2') * 10 + 102.0 + >>> vtor.check('float(max=20.2)', '15.1') * 10 + 151.0 + >>> vtor.check('float(10.0)', '9.0') + Traceback (most recent call last): + VdtValueTooSmallError: the value "9.0" is too small. + >>> vtor.check('float(max=20.0)', '35.0') + Traceback (most recent call last): + VdtValueTooBigError: the value "35.0" is too big. + """ + (min_val, max_val) = _is_num_param( + ('min', 'max'), (min, max), to_float=True) + if not isinstance(value, (int, long, float, string_type)): + raise VdtTypeError(value) + if not isinstance(value, float): + # if it's a string - does it represent a float ? + try: + value = float(value) + except ValueError: + raise VdtTypeError(value) + if (min_val is not None) and (value < min_val): + raise VdtValueTooSmallError(value) + if (max_val is not None) and (value > max_val): + raise VdtValueTooBigError(value) + return value + + +bool_dict = { + True: True, 'on': True, '1': True, 'true': True, 'yes': True, + False: False, 'off': False, '0': False, 'false': False, 'no': False, +} + + +def is_boolean(value): + """ + Check if the value represents a boolean. + + >>> vtor.check('boolean', 0) + 0 + >>> vtor.check('boolean', False) + 0 + >>> vtor.check('boolean', '0') + 0 + >>> vtor.check('boolean', 'off') + 0 + >>> vtor.check('boolean', 'false') + 0 + >>> vtor.check('boolean', 'no') + 0 + >>> vtor.check('boolean', 'nO') + 0 + >>> vtor.check('boolean', 'NO') + 0 + >>> vtor.check('boolean', 1) + 1 + >>> vtor.check('boolean', True) + 1 + >>> vtor.check('boolean', '1') + 1 + >>> vtor.check('boolean', 'on') + 1 + >>> vtor.check('boolean', 'true') + 1 + >>> vtor.check('boolean', 'yes') + 1 + >>> vtor.check('boolean', 'Yes') + 1 + >>> vtor.check('boolean', 'YES') + 1 + >>> vtor.check('boolean', '') + Traceback (most recent call last): + VdtTypeError: the value "" is of the wrong type. + >>> vtor.check('boolean', 'up') + Traceback (most recent call last): + VdtTypeError: the value "up" is of the wrong type. + + """ + if isinstance(value, string_type): + try: + return bool_dict[value.lower()] + except KeyError: + raise VdtTypeError(value) + # we do an equality test rather than an identity test + # this ensures Python 2.2 compatibilty + # and allows 0 and 1 to represent True and False + if value == False: + return False + elif value == True: + return True + else: + raise VdtTypeError(value) + + +def is_ip_addr(value): + """ + Check that the supplied value is an Internet Protocol address, v.4, + represented by a dotted-quad string, i.e. '1.2.3.4'. + + >>> vtor.check('ip_addr', '1 ') + '1' + >>> vtor.check('ip_addr', ' 1.2') + '1.2' + >>> vtor.check('ip_addr', ' 1.2.3 ') + '1.2.3' + >>> vtor.check('ip_addr', '1.2.3.4') + '1.2.3.4' + >>> vtor.check('ip_addr', '0.0.0.0') + '0.0.0.0' + >>> vtor.check('ip_addr', '255.255.255.255') + '255.255.255.255' + >>> vtor.check('ip_addr', '255.255.255.256') + Traceback (most recent call last): + VdtValueError: the value "255.255.255.256" is unacceptable. + >>> vtor.check('ip_addr', '1.2.3.4.5') + Traceback (most recent call last): + VdtValueError: the value "1.2.3.4.5" is unacceptable. + >>> vtor.check('ip_addr', 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + """ + if not isinstance(value, string_type): + raise VdtTypeError(value) + value = value.strip() + try: + dottedQuadToNum(value) + except ValueError: + raise VdtValueError(value) + return value + + +def is_list(value, min=None, max=None): + """ + Check that the value is a list of values. + + You can optionally specify the minimum and maximum number of members. + + It does no check on list members. + + >>> vtor.check('list', ()) + [] + >>> vtor.check('list', []) + [] + >>> vtor.check('list', (1, 2)) + [1, 2] + >>> vtor.check('list', [1, 2]) + [1, 2] + >>> vtor.check('list(3)', (1, 2)) + Traceback (most recent call last): + VdtValueTooShortError: the value "(1, 2)" is too short. + >>> vtor.check('list(max=5)', (1, 2, 3, 4, 5, 6)) + Traceback (most recent call last): + VdtValueTooLongError: the value "(1, 2, 3, 4, 5, 6)" is too long. + >>> vtor.check('list(min=3, max=5)', (1, 2, 3, 4)) + [1, 2, 3, 4] + >>> vtor.check('list', 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + >>> vtor.check('list', '12') + Traceback (most recent call last): + VdtTypeError: the value "12" is of the wrong type. + """ + (min_len, max_len) = _is_num_param(('min', 'max'), (min, max)) + if isinstance(value, string_type): + raise VdtTypeError(value) + try: + num_members = len(value) + except TypeError: + raise VdtTypeError(value) + if min_len is not None and num_members < min_len: + raise VdtValueTooShortError(value) + if max_len is not None and num_members > max_len: + raise VdtValueTooLongError(value) + return list(value) + + +def is_tuple(value, min=None, max=None): + """ + Check that the value is a tuple of values. + + You can optionally specify the minimum and maximum number of members. + + It does no check on members. + + >>> vtor.check('tuple', ()) + () + >>> vtor.check('tuple', []) + () + >>> vtor.check('tuple', (1, 2)) + (1, 2) + >>> vtor.check('tuple', [1, 2]) + (1, 2) + >>> vtor.check('tuple(3)', (1, 2)) + Traceback (most recent call last): + VdtValueTooShortError: the value "(1, 2)" is too short. + >>> vtor.check('tuple(max=5)', (1, 2, 3, 4, 5, 6)) + Traceback (most recent call last): + VdtValueTooLongError: the value "(1, 2, 3, 4, 5, 6)" is too long. + >>> vtor.check('tuple(min=3, max=5)', (1, 2, 3, 4)) + (1, 2, 3, 4) + >>> vtor.check('tuple', 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + >>> vtor.check('tuple', '12') + Traceback (most recent call last): + VdtTypeError: the value "12" is of the wrong type. + """ + return tuple(is_list(value, min, max)) + + +def is_string(value, min=None, max=None): + """ + Check that the supplied value is a string. + + You can optionally specify the minimum and maximum number of members. + + >>> vtor.check('string', '0') + '0' + >>> vtor.check('string', 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + >>> vtor.check('string(2)', '12') + '12' + >>> vtor.check('string(2)', '1') + Traceback (most recent call last): + VdtValueTooShortError: the value "1" is too short. + >>> vtor.check('string(min=2, max=3)', '123') + '123' + >>> vtor.check('string(min=2, max=3)', '1234') + Traceback (most recent call last): + VdtValueTooLongError: the value "1234" is too long. + """ + if not isinstance(value, string_type): + raise VdtTypeError(value) + (min_len, max_len) = _is_num_param(('min', 'max'), (min, max)) + try: + num_members = len(value) + except TypeError: + raise VdtTypeError(value) + if min_len is not None and num_members < min_len: + raise VdtValueTooShortError(value) + if max_len is not None and num_members > max_len: + raise VdtValueTooLongError(value) + return value + + +def is_int_list(value, min=None, max=None): + """ + Check that the value is a list of integers. + + You can optionally specify the minimum and maximum number of members. + + Each list member is checked that it is an integer. + + >>> vtor.check('int_list', ()) + [] + >>> vtor.check('int_list', []) + [] + >>> vtor.check('int_list', (1, 2)) + [1, 2] + >>> vtor.check('int_list', [1, 2]) + [1, 2] + >>> vtor.check('int_list', [1, 'a']) + Traceback (most recent call last): + VdtTypeError: the value "a" is of the wrong type. + """ + return [is_integer(mem) for mem in is_list(value, min, max)] + + +def is_bool_list(value, min=None, max=None): + """ + Check that the value is a list of booleans. + + You can optionally specify the minimum and maximum number of members. + + Each list member is checked that it is a boolean. + + >>> vtor.check('bool_list', ()) + [] + >>> vtor.check('bool_list', []) + [] + >>> check_res = vtor.check('bool_list', (True, False)) + >>> check_res == [True, False] + 1 + >>> check_res = vtor.check('bool_list', [True, False]) + >>> check_res == [True, False] + 1 + >>> vtor.check('bool_list', [True, 'a']) + Traceback (most recent call last): + VdtTypeError: the value "a" is of the wrong type. + """ + return [is_boolean(mem) for mem in is_list(value, min, max)] + + +def is_float_list(value, min=None, max=None): + """ + Check that the value is a list of floats. + + You can optionally specify the minimum and maximum number of members. + + Each list member is checked that it is a float. + + >>> vtor.check('float_list', ()) + [] + >>> vtor.check('float_list', []) + [] + >>> vtor.check('float_list', (1, 2.0)) + [1.0, 2.0] + >>> vtor.check('float_list', [1, 2.0]) + [1.0, 2.0] + >>> vtor.check('float_list', [1, 'a']) + Traceback (most recent call last): + VdtTypeError: the value "a" is of the wrong type. + """ + return [is_float(mem) for mem in is_list(value, min, max)] + + +def is_string_list(value, min=None, max=None): + """ + Check that the value is a list of strings. + + You can optionally specify the minimum and maximum number of members. + + Each list member is checked that it is a string. + + >>> vtor.check('string_list', ()) + [] + >>> vtor.check('string_list', []) + [] + >>> vtor.check('string_list', ('a', 'b')) + ['a', 'b'] + >>> vtor.check('string_list', ['a', 1]) + Traceback (most recent call last): + VdtTypeError: the value "1" is of the wrong type. + >>> vtor.check('string_list', 'hello') + Traceback (most recent call last): + VdtTypeError: the value "hello" is of the wrong type. + """ + if isinstance(value, string_type): + raise VdtTypeError(value) + return [is_string(mem) for mem in is_list(value, min, max)] + + +def is_ip_addr_list(value, min=None, max=None): + """ + Check that the value is a list of IP addresses. + + You can optionally specify the minimum and maximum number of members. + + Each list member is checked that it is an IP address. + + >>> vtor.check('ip_addr_list', ()) + [] + >>> vtor.check('ip_addr_list', []) + [] + >>> vtor.check('ip_addr_list', ('1.2.3.4', '5.6.7.8')) + ['1.2.3.4', '5.6.7.8'] + >>> vtor.check('ip_addr_list', ['a']) + Traceback (most recent call last): + VdtValueError: the value "a" is unacceptable. + """ + return [is_ip_addr(mem) for mem in is_list(value, min, max)] + + +def force_list(value, min=None, max=None): + """ + Check that a value is a list, coercing strings into + a list with one member. Useful where users forget the + trailing comma that turns a single value into a list. + + You can optionally specify the minimum and maximum number of members. + A minumum of greater than one will fail if the user only supplies a + string. + + >>> vtor.check('force_list', ()) + [] + >>> vtor.check('force_list', []) + [] + >>> vtor.check('force_list', 'hello') + ['hello'] + """ + if not isinstance(value, (list, tuple)): + value = [value] + return is_list(value, min, max) + + + +fun_dict = { + 'integer': is_integer, + 'float': is_float, + 'ip_addr': is_ip_addr, + 'string': is_string, + 'boolean': is_boolean, +} + + +def is_mixed_list(value, *args): + """ + Check that the value is a list. + Allow specifying the type of each member. + Work on lists of specific lengths. + + You specify each member as a positional argument specifying type + + Each type should be one of the following strings : + 'integer', 'float', 'ip_addr', 'string', 'boolean' + + So you can specify a list of two strings, followed by + two integers as : + + mixed_list('string', 'string', 'integer', 'integer') + + The length of the list must match the number of positional + arguments you supply. + + >>> mix_str = "mixed_list('integer', 'float', 'ip_addr', 'string', 'boolean')" + >>> check_res = vtor.check(mix_str, (1, 2.0, '1.2.3.4', 'a', True)) + >>> check_res == [1, 2.0, '1.2.3.4', 'a', True] + 1 + >>> check_res = vtor.check(mix_str, ('1', '2.0', '1.2.3.4', 'a', 'True')) + >>> check_res == [1, 2.0, '1.2.3.4', 'a', True] + 1 + >>> vtor.check(mix_str, ('b', 2.0, '1.2.3.4', 'a', True)) + Traceback (most recent call last): + VdtTypeError: the value "b" is of the wrong type. + >>> vtor.check(mix_str, (1, 2.0, '1.2.3.4', 'a')) + Traceback (most recent call last): + VdtValueTooShortError: the value "(1, 2.0, '1.2.3.4', 'a')" is too short. + >>> vtor.check(mix_str, (1, 2.0, '1.2.3.4', 'a', 1, 'b')) + Traceback (most recent call last): + VdtValueTooLongError: the value "(1, 2.0, '1.2.3.4', 'a', 1, 'b')" is too long. + >>> vtor.check(mix_str, 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + + >>> vtor.check('mixed_list("yoda")', ('a')) + Traceback (most recent call last): + VdtParamError: passed an incorrect value "KeyError('yoda',)" for parameter "'mixed_list'" + """ + try: + length = len(value) + except TypeError: + raise VdtTypeError(value) + if length < len(args): + raise VdtValueTooShortError(value) + elif length > len(args): + raise VdtValueTooLongError(value) + try: + return [fun_dict[arg](val) for arg, val in zip(args, value)] + except KeyError as e: + raise VdtParamError('mixed_list', e) + + +def is_option(value, *options): + """ + This check matches the value to any of a set of options. + + >>> vtor.check('option("yoda", "jedi")', 'yoda') + 'yoda' + >>> vtor.check('option("yoda", "jedi")', 'jed') + Traceback (most recent call last): + VdtValueError: the value "jed" is unacceptable. + >>> vtor.check('option("yoda", "jedi")', 0) + Traceback (most recent call last): + VdtTypeError: the value "0" is of the wrong type. + """ + if not isinstance(value, string_type): + raise VdtTypeError(value) + if not value in options: + raise VdtValueError(value) + return value + + +def _test(value, *args, **keywargs): + """ + A function that exists for test purposes. + + >>> checks = [ + ... '3, 6, min=1, max=3, test=list(a, b, c)', + ... '3', + ... '3, 6', + ... '3,', + ... 'min=1, test="a b c"', + ... 'min=5, test="a, b, c"', + ... 'min=1, max=3, test="a, b, c"', + ... 'min=-100, test=-99', + ... 'min=1, max=3', + ... '3, 6, test="36"', + ... '3, 6, test="a, b, c"', + ... '3, max=3, test=list("a", "b", "c")', + ... '''3, max=3, test=list("'a'", 'b', "x=(c)")''', + ... "test='x=fish(3)'", + ... ] + >>> v = Validator({'test': _test}) + >>> for entry in checks: + ... pprint(v.check(('test(%s)' % entry), 3)) + (3, ('3', '6'), {'max': '3', 'min': '1', 'test': ['a', 'b', 'c']}) + (3, ('3',), {}) + (3, ('3', '6'), {}) + (3, ('3',), {}) + (3, (), {'min': '1', 'test': 'a b c'}) + (3, (), {'min': '5', 'test': 'a, b, c'}) + (3, (), {'max': '3', 'min': '1', 'test': 'a, b, c'}) + (3, (), {'min': '-100', 'test': '-99'}) + (3, (), {'max': '3', 'min': '1'}) + (3, ('3', '6'), {'test': '36'}) + (3, ('3', '6'), {'test': 'a, b, c'}) + (3, ('3',), {'max': '3', 'test': ['a', 'b', 'c']}) + (3, ('3',), {'max': '3', 'test': ["'a'", 'b', 'x=(c)']}) + (3, (), {'test': 'x=fish(3)'}) + + >>> v = Validator() + >>> v.check('integer(default=6)', '3') + 3 + >>> v.check('integer(default=6)', None, True) + 6 + >>> v.get_default_value('integer(default=6)') + 6 + >>> v.get_default_value('float(default=6)') + 6.0 + >>> v.get_default_value('pass(default=None)') + >>> v.get_default_value("string(default='None')") + 'None' + >>> v.get_default_value('pass') + Traceback (most recent call last): + KeyError: 'Check "pass" has no default value.' + >>> v.get_default_value('pass(default=list(1, 2, 3, 4))') + ['1', '2', '3', '4'] + + >>> v = Validator() + >>> v.check("pass(default=None)", None, True) + >>> v.check("pass(default='None')", None, True) + 'None' + >>> v.check('pass(default="None")', None, True) + 'None' + >>> v.check('pass(default=list(1, 2, 3, 4))', None, True) + ['1', '2', '3', '4'] + + Bug test for unicode arguments + >>> v = Validator() + >>> v.check(unicode('string(min=4)'), unicode('test')) == unicode('test') + True + + >>> v = Validator() + >>> v.get_default_value(unicode('string(min=4, default="1234")')) == unicode('1234') + True + >>> v.check(unicode('string(min=4, default="1234")'), unicode('test')) == unicode('test') + True + + >>> v = Validator() + >>> default = v.get_default_value('string(default=None)') + >>> default == None + 1 + """ + return (value, args, keywargs) + + +def _test2(): + """ + >>> + >>> v = Validator() + >>> v.get_default_value('string(default="#ff00dd")') + '#ff00dd' + >>> v.get_default_value('integer(default=3) # comment') + 3 + """ + +def _test3(): + r""" + >>> vtor.check('string(default="")', '', missing=True) + '' + >>> vtor.check('string(default="\n")', '', missing=True) + '\n' + >>> print(vtor.check('string(default="\n")', '', missing=True)) + + + >>> vtor.check('string()', '\n') + '\n' + >>> vtor.check('string(default="\n\n\n")', '', missing=True) + '\n\n\n' + >>> vtor.check('string()', 'random \n text goes here\n\n') + 'random \n text goes here\n\n' + >>> vtor.check('string(default=" \nrandom text\ngoes \n here\n\n ")', + ... '', missing=True) + ' \nrandom text\ngoes \n here\n\n ' + >>> vtor.check("string(default='\n\n\n')", '', missing=True) + '\n\n\n' + >>> vtor.check("option('\n','a','b',default='\n')", '', missing=True) + '\n' + >>> vtor.check("string_list()", ['foo', '\n', 'bar']) + ['foo', '\n', 'bar'] + >>> vtor.check("string_list(default=list('\n'))", '', missing=True) + ['\n'] + """ + + +if __name__ == '__main__': + # run the code tests in doctest format + import sys + import doctest + m = sys.modules.get('__main__') + globs = m.__dict__.copy() + globs.update({ + 'vtor': Validator(), + }) + + failures, tests = doctest.testmod( + m, globs=globs, + optionflags=doctest.IGNORE_EXCEPTION_DETAIL | doctest.ELLIPSIS) + assert not failures, '{} failures out of {} tests'.format(failures, tests)