You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

168 lines
5.0 KiB
C

1 year ago
#pragma once
/*
* arduinoLoRa Library just only support SX1276/Sx1278,Not support SX1262
* */
// #define LILYGO_TBeam_V0_7
#define LILYGO_TBeam_V1_0
// #define LILYGO_TBeam_V1_1
// #define LILYGO_T3_V1_0
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V2_0
// #define LILYGO_T95_V1_0
/*
* if you need to change it,
* please open this note and change to the frequency you need to test
* Option: 433E6,470E6,868E6,915E6
* */
#define LoRa_frequency 868E6
#define UNUSE_PIN (0)
#if defined(LILYGO_TBeam_V0_7)
#define GPS_RX_PIN 12
#define GPS_TX_PIN 15
#define BUTTON_PIN 39
#define BUTTON_PIN_MASK GPIO_SEL_39
#define I2C_SDA 21
#define I2C_SCL 22
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 14
#define LED_ON HIGH
#define LED_OFF LOW
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_TBeam_V1_0) || defined(LILYGO_TBeam_V1_1)
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
#define BUTTON_PIN 38
#define BUTTON_PIN_MASK GPIO_SEL_38
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 4
#define LED_ON LOW
#define LED_OFF HIGH
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
#define OLED_RST 16
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN UNUSE_PIN
#define RADIO_BUSY_PIN UNUSE_PIN
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 0
#define LED_ON LOW
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T95_V1_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 18
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 23
#define RADIO_CS_PIN 5
#define RADIO_DI0_PIN 26
#define RADIO_RST_PIN 4
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 32
#define RADIO_BUSY_PIN UNUSE_PIN
#define ADC_PIN 35
#define HAS_DISPLAY
#else
#error "Please select the version you purchased in utilities.h"
#endif