arduino-mk template

templates/arduino-make/.gitignore

@@ -0,0 +1 @@
+build-*

templates/arduino-make/Makefile

@@ -0,0 +1,12 @@
+# This will only work if you have installed arduino-mk
+# And set your shell rc with the following env variables:
+#
+#        export ARDUINO_DIR=/usr/share/arduino
+#        export ARDMK_DIR=/usr/share/arduino
+#
+# Adjust to reflect your own paths!
+
+BOARD_TAG	= nano328
+MONITOR_PORT	= /dev/ttyUSB0
+
+include ${ARDMK_DIR}/Arduino.mk

templates/arduino-make/blink.ino

@@ -0,0 +1,18 @@
+/*
+  Blink
+  Turns on an LED on for one second, then off for one second, repeatedly.
+  This example code is in the public domain.
+ */
+
+void setup() {                
+	// initialize the digital pin as an output.
+	// Pin 13 has an LED connected on most Arduino boards:
+	pinMode(13, OUTPUT);     
+}
+
+void loop() {
+	digitalWrite(13, HIGH);   // set the LED on
+	delay(1000);              // wait for a second
+	digitalWrite(13, LOW);    // set the LED off
+	delay(1000);              // wait for a second
+}